Applicable Version
7.0.4.2

Attention
After the update, the system will auto-reboot, automatically resuming paused services.

Update Details․Admin Interface
==========
※Device Setting※
(01) ADD Settings for【Remote Recording Server】feature.
(02) ADD Settings for【HDD Health】feature.

NewWork→
ADJUST "Network interface card status" now displays "Speed" and "Duplex".

Device Command→
(01) ADJUST【Basic Setup】> "General" > "HTTPS SSL High Level" default setting is ON.
(02) ADJUST【Basic Setup】> "Power Setting" displays a shutdown status screen during shutdown.
(03) FIX【Basic Setup】> "Power Setting" The system fails to reboot in certain cases.
(04) FIX【Basic Setup】> "Power Setting": "User Notification" Enabling the setting causes "Power Schedule" to fail to execute in certain cases.
(05) FIX【Basic Setup】> "Power Setting": "User Notification" Incorrect info appears in 【Log > Use Log】 after sending notifications.
(06) FIX【SSL Certificate】>【SSL Certificate Setup】Unable to save the settings correctly when choosing "Manual input".

Mail Handle→
(01) ADJUST "Log Life Cycle" > "【Log > Mail Log】" allows custom retention by days or months.
(02) ADJUST "Log Life Cycle" > "【Log > Mail Log】" Display a prompt message and prevent saving if it is less than "Separate Email".
(03) FIX Incorrect file size info appears on the attachment link page when "RTF Conversion Setting" > "Provide hyperlinks to download the
(04) original mail" is enabled.
(05) FIX "Log Life Cycle" Including out-of-cycle data in query conditions causes query failure in certain cases.

SMTP Server→
(01) FIX【SMTP Server】>【New/Edit】> "Source Network Address Translation IP" Setting does not take effect in certain cases.
(02) FIX【SMTP Server】Incorrect password storage causes authentication failure in certain cases.
(03) FIX【Send Fail Log】In certain cases, "Recipient" field is blank in the detailed info.
(04) FIX【Send Fail Log】In certain cases, "Type" field is blank in the detailed info.

Backup→
(01) FIX【Full Backup Setup】Certain services fail when using the full backup drive as the boot drive.
(02) FIX【Full Backup Setup】Saving settings displays a failure message.

License Management→
ADJUST "License Name: Max Accounts" now shows "Number of enabled accounts".

High Availability→
(01) ADJUST The standby server can send notification emails and include source info in the email subject.
(02) FIX "Hard disk Status" info is displayed incorrectly in certain cases.
(03) FIX Data displays incorrectly in prompt messages when switching roles or in enabling status.
(04) FIX In certain cases, no prompt messages appear when high availability fails.

Unterruptible Power System→
(01) ADJUST "General" > "Low Battery" Setting range is changed to 80% - 1%.
(02) ADJUST "General" > "Low Battery Limit" Setting range is changed to 50% - 1%.
(03) FIX "General" > "UPS Connection Mode: Network UPS" Connection fails as the name cannot be customized.
(04) FIX UPS info is displayed incorrectly in certain cases.

※Device Notice※
Device Message Notification→
(01) FIX【Line Notify List】: "Remaining Times" Info is incorrect.
(02) FIX【Line Notify List】Unable to bind in certain cases due to browser extension interference.
(03) FIX【Line Notify List】Incorrect info in "Notification Items" in certain cases.
(04) FIX【Notification Letter Group List】>【New/Edit】> "Recipient" list displays incorrectly.
(05) FIX【Notification Letter Group List/ Line Notify List】Notifications are still sent despite【Device Setting > High Availability】notifications
(06) are not enabled.
(07) FIX Some notification emails contain garbled text.

Separate Mail List→
ADD【User】: "Virus List/Sandstorm Quarantine Mail/Spam List" now has "Send To Local Sender" setting.

※External Mail Archive※
Database Backup Setting→
(01) ADD "Backup schedule instructions" feature.
(02) FIX In certain cases, settings can be added even when【Device Setting > Backup > Backup Setup】is not configured.

※Architecture※
Basic Setting→
(01) ADD "Basic Setting" now has "Maximum Mail Size" setting.
(02) FIX "Gateway Mode" > "Send Mail Without Authentication IP or IP/Mask" Setting does not work.

Network Interface & Routing→
FIX【routing Setup】When there are multiple identical "Destination / Genmask" settings, it may cause interface display issues.

POP3 Proxy→
(01) ADJUST It now has a prompt note when "Leave a copy on the server, remove from server after X days" is not enabled.
(02) ADJUST Notification and homepage prompt will appear when OAuth2 token expires.

IMAP Proxy→
(01) FIX Automatic server mail deletion did not function correctly in certain cases.
(02) FIX In certain cases, after proxy,【Log > Mail Log】> "Direction" is misjudged as a non-internal domain.
(03) FIX In certain cases, after proxy,【Log > Mail Log】> "Destination IP" displays incorrectly.
(04) FIX Large emails cause processing interruptions in certain cases.
(05) FIX In certain cases, processing issues may occur when email folder names contain spaces during proxy.
(06) FIX In certain cases, logs do not show failed selection info when some email folders are inaccessible during proxy.
(07) FIX In certain cases, Hinet accounts cannot execute correctly during proxy.

Mail Migration→
(01) ADJUST【IMAP account list】> "Last Transfer Log" now has【Transfer Failed Email Info】.
(02) FIX【POP3 account list】Authentication fails if the password contains a backslash (\).
(03) FIX【IMAP account list】In certain cases, authentication fails due to incorrect use of the authorized account.
(04) FIX【IMAP account list】In certain cases, processing issues may occur when email folder names contain spaces during migration.
(05) FIX【IMAP account list】In certain cases, logs do not show failed selection info when some email folders are inaccessible during migration.
(06) FIX 【IMAP account list】In certain cases, Hinet accounts cannot execute correctly during migration.
(07) FIX【POP3/IMAP account list】Password info displays incorrectly
(08) FIX【POP3/IMAP account list】In certain cases, interface issues occur due to large migration records.

HERHSIANG Sync→
(01) FIX When the configured account (MDS/MDispersion Admin Account) does not
have API permissions enabled, sync may still fail for a period after
enabling API permissions.
(02) FIX In certain cases, "Add to White List" setting is missing in the user spam list after sync.
(03) FIX MyMail’s Webmail link fails after sync.

Cloud Drive Proxy→
(01) FIX【New】> "Connect mode: SATA" in certain cases fails to show "SATA Device" info correctly.
(02) FIX Proxy fails when choosing FTP for connect mode.
(03) FIX In certain cases, NAS retrieves the same email multiple times during proxy.

Bridge & Gateway Mail Queue→
ADJUST【Mail Queue Manage】> "Mail Backup Queue" > "Queue Keep in System" is now configurable.

※Authentication & Permissions※
Domain Management→
ADD【New/Edit】now has "Searcher/User Interface Custom" settings.

User Management→
(01) ADD【New/Edit】now has "Searcher/User Interface Custom" settings.
(02) ADD【Import/Export】has "Searcher/User Interface Custom Set value calculator" feature.
(03) ADD User List > "Setup" shows the info for " Security settings/ Searcher/User Interface Custom".
(04) ADJUST "Search" now can search for "Security settings".
(05) ADJUST The number of enabled accounts will not include accounts in the trash.
(06) ADJUST【Import/Export】After import, the creation time of existing accounts will remain unchanged.
(07) FIX【New/Edit】> "General: Password Security Option" In some cases, "password can’t be the same as the previous 3 times" does not
work.
(08) FIX【Edit】When editing AD/LDAP non-synced accounts, the DN field will be cleared.
(09) FIX 【Edit】> "Two-Factor Authentication: Google Authenticator" QR Code does not work.
(10) FIX The【Delete】button's tooltip displays incorrect AD host info.
(11) FIX In some cases, the unblock button is not displayed correctly and does not execute correctly upon unblocking.
(12) FIX Accounts using OAuth authn cannot perform two-factor Authentication upon login.

OAuth→
(01) ADJUST Password and key fields do not display the full string after saving settings.
(02) FIX In some cases, the ON/OFF setting does not link correctly with other interface functions after saving.

Account Integration→
(01) ADJUST Domains are uniformly saved in lowercase to avoid processing errors.
(02) FIX【AD Account Integration】>【New/Edit】> "Synchronize time" displays incorrect tooltip info.