MGMT. / LAN IP: 192.168.1.1 255.255.255.0

https://192.168.1.1

admin/ admin

3G/4G USB: DLINK DWM-222 / HUAWEI E3372h / HUAWEI E161 (3G only)

5G USB: APAL Dongle

Cisco3560e
Cisco3750
H3C-S5100
H3C-S7506R
SGI-2404
Juniper-ex2200
ML-9528
GS2210-48
GS2210-24HP
GS2210-24
XGS3700-48
XGS3700-24
DGS1510-28X
Cisco-C2960L-24TS-LL
GS2220-28
GS2220-50
XGS2210-52

NWA5121-NI
NWA5123-AC HD
NWA1123-ACv2
NWA1123-ACv3
NWA1123-AC HD
NWA1123-AC PRO
NWA110AX
NWA50AX
NWA90AX
NWA210AX
WAX510D
WAX610D
Netgear WAC510

The NGS new generation firewall uses the ZONE architecture, and of course it can be used as an intranet security firewall (ISFW).

Safety mechanism can be used (functions vary by model))
Application control (database)
URL control (database)
IPS (active hacking early warning detection blocking)
DNS filter (sandstorm malware)
WEB anti-virus and records (Internet and web protection)
Email filtering and anti-virus records
SYN attack/ICMP attack/UDP attack/Port Scan (passive detection and blocking service)

Bridge Mode Model ( ROUTER )
NGS 3H
NGS 5H
NGS 1315HE
NGS 1351HF

NGS 3542HTG
NGS 3572HF

ZONE mode model ( ROUTER / NAT )
NGS 5752HF
NGS 5792HF
NGS 5772HG

NGS 5972HG
NGS 5952HTG

Please use PC / NB to download putty and install, COM? Please set it according to the built-in number of PC / NB, the setting rate is 115200 N 8 1 (Please use exclusive RS-232, which is attached when purchasing the machine)

In the case of not canceling HA, first restart the Slave. After the Slave is restarted, the Master is restarted to process this action to clear unnecessary temporary residual files and release some unnecessary temporary storage. The next step is to Shut down the Master directly (at this time, the Slave will take over the service), start updating the Slave, and let the Slave update normally to see if the boot is normal. If the Slave is turned on without any problems, then shut down the Slave directly. At this time, the Master will be turned on to start the update and wait for the Master to be updated. After the slaves are all the same version, the HA architecture update firmware can be completed after the slave is turned on.

PS: The shutdown behavior is to prevent two hosts from grabbing services online at the same time, to avoid IP conflicts and unable to connect to the host normally

General->Network Port RJ45
Fiber Module->Network Port GBIC Slot (Need to purchase 1G 10G GBIC separately)